Fischer Technology, Inc. Eddy Current Instruments (for use with Smart Probes)

Enlarge Image

The rugged ISOSCOPE® MP30 hand-held instrument is ideal for users who need a separate eddy current unit with full measurement storage, downloading and printing capabilities. The ISOSCOPE® MP30 is capable of storing 10,000 measurements in 1,000 blocks in up to 100 applications. The ISOSCOPE® MP30 also features a unique and easy-to-read, 2.4" x 1.2" LCD display. The information packed display makes operation incomparably simple. Displayed information includes individual measurement data, measurement number, application number, block number, statistical data, Cp and Cpk, product specification limit violation, date, time, icons and symbols to indicate operation mode and settings, and two text lines for 16 alphanumeric or freely definable symbols per line to display data and operator prompts. The ISOSCOPE® MP30 has the ability to print a histogram, a cumulative frequency distribution chart, and the Cp and Cpk indices. An auto averaging feature reduces the effect of surface roughness on the measurement data range. The individual probe is automatically recognized. Application specific calibration parameters are stored in the probe, therefore the instruments are immediately ready to measure after connection of any probe. The ISOSCOPE® MP30 uses the eddy current test method according to DIN EN ISO 2360, ASTM B244. It is ideal for measuring: Non-conductive coatings on non-ferrous metals such as paint, lacquer, synthetics on aluminum, copper, brass, zinc and stainless steel Anodic coatings on aluminum (non-ferrous substrates)

Product Features

• AC line connection is possible as an alternative to battery operation.
• Large LCD display for measurement and evaluation data as well as icons for status display and operation notes.
• Easily exchangeable plug-in type smart measurement probes.
• Automatic probe recognition.
• Automatic measurement capture when probe contacts specimen.
• Acoustic signals indicate measurement acceptance.
• Lockable keyboard.
• Statistical evaluation of measurement series and display of minimum, maximum, mean value, number of measurements, standard deviation, and date and time.
• Continuous display mode with coating thickness display in an analog bar graph between pre-set specification limits.
• External push button measurement accept, handy for measurements on the inside of small bores.
• Immediately ready to measure.
• Simple calibration adjustment to the test area geometry with the ZERO key.
• Additional corrective calibration with one or two calibration foils.
• Master calibration for highest measurement accuracy if the material and geometric properties of specimen are unusual.
• Master calibration is stored in the connected probe.
• A maximum of 10,000 measurements can be stored in 1,000 blocks in up to 100 applications. The size of a block can either be selected freely or can be fixed.
• Standard and matrix measurement mode.
• Single measurement mode. Only the mean value of several single readings is stored.
• Outlier rejection to eliminate erroneous measurements.
• Correction of previously stored measurements is possible.
• Input of specification limits.
• Bidirectional RS232 interface or unidirectional radio interface.
• Selection between automatic shut-off 4 minutes after the last measurement or continuous operation.
• Unit of measurement selectable between U.S. and metric units.
• Various status message displays (for instance, a warning message when the battery voltage is low).
• Eight selectable display languages.

Product Code: ISOSCOPE® MP30E-S (603-694(S)) Product Weight: 2 lbs.   Model: ISOSCOPE® MP30E-S Testing Range: Probe dependent Applications: Paint, powder, anodizing, enamel or plastic coatings on non-ferrous metals; Anodic coatings on aluminum Size (inches): 6.3” by 3.15” by 1.2” Weight of Item (without packaging): 8.11 oz. (without Batteries) Insurance Required (is included with Freight at Checkout): $6.60

Sold In		Web Price	QTY
EACH		$1,200.00